MIMAKI GP-1810 Manuál s instrukcemi

Procházejte online nebo si stáhněte Manuál s instrukcemi pro Tisk a skenování MIMAKI GP-1810. MIMAKI GP-1810 Instruction manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 152
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
MIMAKI ENGINEERING CO., LTD.
TKB Gotenyama Building, 5-9-41, Kitashinagawa, Shinagawa-ku, Tokyo 141-0001, Japan
Phone: +81-3-5420-8671 Fax: +81-3-5420-8687
URL: http: // www.mimaki. co. jp /
OPERATION MANUAL
D201264
Zobrazit stránku 0
1 2 3 4 5 6 ... 151 152

Shrnutí obsahu

Strany 1 - OPERATION MANUAL

MIMAKI ENGINEERING CO., LTD.TKB Gotenyama Building, 5-9-41, Kitashinagawa, Shinagawa-ku, Tokyo 141-0001, JapanPhone: +81-3-5420-8671 Fax: +81-3

Strany 2

- vi -FeaturesThe features of the machine are described below. Together with the method of operation of themachine explained in this manual, they help

Strany 3 - Requests

- 5.16 -Execute the flushing and cleaning regularly [Routine Control]This function allows for the pigment ink for textile (TPig).Set time limits on th

Strany 4 - FCC Statement (USA)

- 5.17 -Execute the flushing and cleaning regularly [Routine Control]Routine CleaningThe routine cleaning function is executed with the power on.Time

Strany 5 - Foreword

- 5.18 -Specifying the print head line [Use Head]Use this function if nozzle missing cannot be recovered even after repetitive cleaning or if plotting

Strany 6 - TABLE OF CONTENTS

- 6.1 -CHAPTER 6When Abnormal ConditionsAre EncounteredChapter 6 describes corrective measures to be taken in the case where an to be taken incase an

Strany 7 - CHAPTER 3 Daily Care

- 6.2 -Abnormal conditions where no error massage appearsCorrective measures for problems where no error message is given on the LCD are described in

Strany 8 - CHAPTER 5 Maintenance

- 6.3 -If image quality declinesCorrective measures against problems where satisfactory image quality is not provided are describedin this station. Ta

Strany 9

- 6.4 -When printing trouble occurs inUnable to dischargeCorrective measure: 1. Make sure if the discharge liquid is filled.If not filling the dischar

Strany 10 - Features

- 6.5 -Problems where error messages are given on the LCDIf something is wrong with the machine, the buzzer sounds and a corresponding error message i

Strany 11 - Easy “origin” setting

- 6.6 -Unidentified Ink12345678ABCDEFGHInk Limit12345678ABCDEFGHInk Color12345678ABCDEFGHInk Type12345678ABCDEFGHInk IC Error12345678ABCDEFGHInk

Strany 12 - Safety symbols used in manual

- 6.7 -Below OperableTemperatureTemperatureEvn. Temp is LowTemperatureEvn. Temp is HighTemperature is below operablecondition.Temperature is below gua

Strany 13 - WARNING

- vii -FeaturesHigh-speed interfaceThe "IEEE-1394" interface allows for high-speed data reception from the computer.Easy “origin” settingThe

Strany 14 - CAUTION

- 6.8 -Error messagesError messages contain error numbers.If any error message is given on the LCD, turn off the power to the machine for while and tu

Strany 15

- 6.9 -ERROR 11PARAMETERERROR 14COLOR COMMANDERROR 20I / F BOARDERROR 21THERE IS NO I / FERROR 23HOST I / FERROR 24 I / F INITIALERROR 30OPERATIONERRO

Strany 16 - Precautions in installation

- 6.10 -ERROR 46WIPERERROR 51ORIGIN DETECTIONWarning message Cause Corrective measureThe wiper position is notcorrect.Origin could not be detected.Tur

Strany 17 - Operation keys

- A.1 -APPENDIXThis appendix describes the specifications of the machine and componentsand the structure of the function menu.Table of contentsBasic s

Strany 18

- A.2 -Basic specificationsItem GP-1810DPrinting head Method Piezo-electric drop-on demandSpecification 6-heads Color : Rear (2 x 2 lines)Discharge :

Strany 19 - Before Use

- A.3 -Basic specificationsItem GP-1810DSafety Standard VCCI-classA, FCC-classA, CBreportCE marking (EMC Directive, low-voltage Directive), ETL/cETLP

Strany 20 - Where to install the machine

- A.4 -Ink specificationItem SpecificationsForm Exclusive ink cartridgeType Pigment ink for Textile / SPC-0350 series (K, M, C)Pigment ink for Textile

Strany 21 - Moving the machine

- A.5 -Discharge liquid / Washing liquid specificationItem SpecificationsInk type Washing liquid (SPC-0422) Fill up when operatiom finished.Washing li

Strany 22 - Configuration and function

- A.6 -Location of safety labelsThe following safety labels (10 kinds and 25 labels in total) have been attached to this machine. Ifany of them fall o

Strany 23 - The Rear

- A.7 -Location of safety labels1M9039682 LHDM-04(Japanese)PED-04(English)3M9014694M9016075M9015496M903226(Japanese)M904325(English)7 LHCM-02(Japanese

Strany 24 - Operation Panel

- viii -Safety precautions during installationSafety symbols used in manualSafety signal wordsPictorial signs are used in this Operation Manual for sa

Strany 25 - Functions of the Z keys

- A.8 -MFR LabelNo.12LabelFDA Label12Serial No.********SerialMonthYea rProduct CodeOther labels

Strany 26 - Capping station

- A.9 -Function flowchart

Strany 27 - Carriage

- A.10 -Move up ZMove the tableforward anddischarge X originL-1Err DisplayBOOTGP-1810D V ∗ . ∗ ∗Please Wait<< LOCAL >>X= ∗ ∗ ∗ ∗

Strany 28 - Ink cartridge and Ink station

- A.11 -InitializePlease WaitTurn Valve2.4 To[CLOSE] –> [ENT]Turn Valve1.3 To[WASH] –> [ENT]InitializePlease WaitFillinging 2/500:

Strany 29 - Ink station

- A.12 -ENTERVIEWENTERCLEARENTERENTERL-1Origin Setup∗ ∗ ∗ ∗ Origin ∗ ∗ ∗ ∗Origin SetupX= ∗ ∗ ∗ ∗ Y= ∗ ∗ ∗ ∗Head Height∗ ∗ . ∗ mmHead Height

Strany 30 - 1,100 mm.)

- A.13 -ENTERENTERPrint AreaX=∗ ∗ ∗ ∗ Y=∗ ∗ ∗ ∗Print Areaend< >entPrint AreaX=∗ ∗ ∗ ∗ Y=∗ ∗ ∗ ∗Return to LOCALReturn

Strany 31 - Direct printing on a cloth

- A.14 -L-3L-2Clean :12563478Select :ABEF- - - - -CLEANINGENTERCleaningType :NormalCYCLESTART<REMOTE> TYPE∗X=∗∗∗∗ Y

Strany 32 - MENU mode

- A.15 -Cleaning00:00:00CleaningPlease WaitInk Near End12--5678AB--EFGHFeed Comp. 100Save :entDisplay when Ink Near End occursAlte

Strany 33 - Basic Operations

- A.16 -ENTERS-1L-3Ink Level9999999999999999Head Height∗∗.∗mmENTERENTERFUNCTIONGuidance displayThe remaining ink are displaywith level 0 to 9Display c

Strany 34 - Operation

- A.17 -ENTERENTERInk TypeType :TPigVer1.00 MRL-IICSETUP<TYPE∗>Display [V]KeyError InfoDisplay [V]KeyDefault Check NGSET/

Strany 35 - Switching on the power supply

- ix -Never do the following WARNINGPower supply and voltage• Be sure to use the machine withthe power supply specificationsindicated.• Be sure to con

Strany 36

- A.18 -ENTERENTERENTERS-2S-1S-3FUNCTIONSETUP <ENT>SETUPSELECT :TYPE1TYPE∗PrintMode <ent>ENTERENTERENTERTYPE∗OverPrint

Strany 37 - LOCAL mode

- A.19 -ENTERENTERENTERENTERTYPE∗Quality :STDTYPE∗Direction :UNI-DTYPE∗Layer :1TYPE∗Time :0.0sTYPE∗PrintMod

Strany 38 - Station cover

- A.20 -S-4S-2FUNCTIONX( )<ENTERENTERS-3S-5TYPE∗Refresh <ent>TYPE∗mm/inch <ent>X( )<FUNCTIONX( )<X( )<

Strany 39 - Adjusting the head height

- A.21 -TYPE∗Refresh :Level3TYPE∗mm/inch :mmX( ):Level0~Level3<<X( ) :inch<<Function Flowchart

Strany 40 - • Always print on flat works

- A.22 -ENTERENTERENTERS-4 S-5M-1TYPE∗Media Comp. <ent>TYPE∗AutoClean <ent>TYPE∗SetupReset <ent>FUNCTIONX( )<X( )<

Strany 41 - Fixing the work holder

- A.23 -ENTERENTERTYPE∗Print :Y=∗∗∗∗∗∗Printing∗∗Please WaitTYPE∗Adjust =0TYPE∗AutoClean :ONTYPE∗Reset

Strany 42 - Initial value

- A.24 -X( )<ÅÑENTERENTERENTERENTERM-2M-1FUNCTIONMAINTENANCE <ENT>MAINTENANCEList <ent>M-3ListPrint

Strany 43

- A.25 -X( ) =-15.0~15.0ENTER :Pattern1~7∗∗Printing∗∗Please Wait∗∗Dumping∗∗Please Wait∗∗Printing∗∗Please WaitPrintAdjustPattern1

Strany 44 - Abnormal Pattern

- A.26 -X( )<X( )<ENTERENTERENTERM-2M-4ENTERM-5M-3MAINTENANCEStation <ent>Station MaintSel :CarriageOutM-6Station MaintS

Strany 45 - On / Off

- A.27 -ENTERENTERENTER• The wiper placed forward• Head at the bottom• Carrige is on a belt• Servo motor OFF• Wiper cleaning CNT clearCarriage OutComp

Strany 46 - Normal / Strong

- x -Precautions in use CAUTIONPeriodic exchange parts• There are some parts whichmust be replaced by serviceengineer. You have to make acontract wit

Strany 47 - Correcting the work feed rate

- A.28 -X( )ENTERM-4M-7M-5M-8M-6Station MaintSel :Drain WashStation MaintSel :StorageWashFUNCTIONX( )<FUNCTIONX( )<X( )<X(

Strany 48

- A.29 -ENTERENTERENTERENTERDrain WashCompleted :entWiper CleaningCompleted :ent• Drain tube LockFill Up WashingsCompleted :entNozzl

Strany 49

- A.30 -M-7M-9ENTERENTERFilling :12563478Select :ABEF– – – –M-10M-8MAINTENANCEInk Filling <ent>X( ) :Head On/OffY(< >) :M

Strany 50

- A.31 -Filling00:00:00FillingPlease WaitShows remaining timesFunction Flowchart

Strany 51

- A.32 -ENTERENTERENTERM-9M-11Ink ChangeStart :entM-12M-10MAINTENANCEInk Change <ent>Washing 2/500:00:00Proc

Strany 52

- A.33 -Remove Cartridge12345678– – – – – – – –Ink First FillingStatusverifyDischarging washing liq.Set washing toolsRemove ink cartridgeStatusverify

Strany 53

- A.34 -ENTERM-11DISPENTERInformationView :VersionM-12MAINTENANCEInformation <ent>FUNCTIONX( )<FUNCTIONX( )<X( )<FUNC

Strany 54

- A.35 -ENTERENTERMAIN Ver1.00I/F Ver ∗.∗∗Routine FlushingFlushing :ONRoutine FlushingInterval :1hRoutine

Strany 55 - LOCAL mode

- A.36 -ENTERENTERENTERENTERENTERENTERENTERDISPFUNCTIONDISPLAY <ENT>DISPLAYENGLISH <ent>FUNCTIONDCG/WASH SW <ENT>DCG/WASH

Strany 56 - Turning the power off

- A.37 -Filling00:00:00ENTERInitializePlease WaitInitializePlease WaitFilling00:00:00Display remaining timeDisplay remaining timeFunction Flowchart

Strany 57 - Daily Care

- xi -• Using any ink type other than theexclusive one can cause atrouble. Remover that the usershall be charged for a repair costto correct any damag

Strany 58 - Routine maintenance

- A.38 -D201264-1.10-18102006

Strany 60

Printed in JapanD201264© MIMAKI ENGINEERING CO., LTD. 2006TMFW2.00

Strany 61 - X =1010 Y = 1860

Precautions in installation CAUTIONA place exposed to direct sunlight• Do not install machine where it isexposed to direct sunlight orwork may be disc

Strany 62

How to read this operation manualDisplay on the LCD and Indication of the KeysIn this Operation Manual, the characters displayed on the LCD of the ope

Strany 63

- xiv -Structure of this Operation ManualThis manual consists of the following six chapters to describe the handling of the machine.Chapter 1 Befor

Strany 64

- 1.1 -CHAPTER 1Before UseThis chapter describes the name and function of each section of the machine as wellas ink and work.Table of contentsWhere to

Strany 66

- 1.2 -Where to install the machineSecure a suitable installation space before assembling the machine.Install the machine considering enough space for

Strany 67 - 10. Press the [ENTER] key

- 1.3 -Moving the machineThis section explains to carry the machine to e.g., an instruction location after assembled.Raise the level feet of the table

Strany 68

- 1.4 -Configuration and functionThe Front12345678910113Name Function1 Pilot lamp Displays the plotter status as ACTIVE (green), or ERROR (red).2 Stat

Strany 69

- 1.5 -Configuration and functionThe Rear1221Name Function1 Ink cartridge Each cartridge contains ink of a specific color.2 Ink station Set the ink ca

Strany 70

- 1.6 -Operation PanelThe operation panel that is used to operate the machine.POWER lampIt lights up (in green) when thepower to the machine is turne

Strany 71

- 1.7 -Configuration and functionFunctions of the XY keysEach of the keys varies in function according to the time at which it is used.When selecting

Strany 72

- 1.8 -Capping stationThe capping station consists of ink caps, wipers for cleaning the heads, etc.Cap : It covers the nozzle so as to prevent the hea

Strany 73

- 1.9 -Configuration and functionCarriageThe cartridge provides the changeover valve of the ink head for print and discharge, and thechangeover valve

Strany 74

- 1.10 -Ink cartridge and Ink stationPrecautions in handling the ink cartridge• Use the specified ink.Using any ink type other than the exclusive one

Strany 75

- 1.11 -Ink cartridge and Ink stationInk stationThe Discharge liquid / Washing liquid station supplies ink to the 2 front row of Carriage.The 4-colors

Strany 76

DISCLAIMER OF WARRANTYTHIS LIMITED WARRANTY OF MIMAKI SHALL BE THE SOLE AND EXCLUSIVEWARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IM-PL

Strany 77 - How to Set Functions

- 1.12 -Types of work that can be usedThe following describes the sizes of work that can be used and the method of handling.Sizes of work that can be

Strany 78 - Basic operations of menus

- 1.13 -REFERENCEPressT-shirt material 160oC / 60 secondCotton broad cloth 190OC / 40 secondDirect printing on a cloth•To minimize color variations, m

Strany 79

- 1.14 -MENU modeThe unit’s four modes are described blow.< LOCAL > modeThis mode is for the preparatory state.All keys are effective to enable

Strany 80 - Function mode

- 2.1 -CHAPTER 2Basic OperationsThis chapter describes a series of operations and settings, ranging from power-on toend of printing.Table of contentsO

Strany 81 - Setup functions

- 2.2 -OperationThe following shows a series of operations and settings, ranging from power-on to end of printing.For details on each item, refer to t

Strany 82 - Priority

- 2.3 -Switching on the power supplyTurning the power on1. Turn on the power to the computer which isconnected to the machine.2. Turn on the power to

Strany 83 - Setup Reset

- 2.4 -Filling of discharge liquid at the time of starting worksIf the discharge liquid in this machine has used in the long period, it may cause the

Strany 84

- 2.5 -Filling of discharge liquid at the time of starting works11.Filling of the discharge liquid iscompleted, menu returns to the LOCAL mode.• Eve

Strany 85 - Maintenance

- 2.6 -Station coverOpening/closing the station cover•Keep the station cover closed during printing operation. Opening the stationcover during printin

Strany 86 - Maintenance of the machine

- 2.7 -Adjusting the head heightThe head can be adjusted in height, according to thickness of a work used for printing.The head height must be set acc

Strany 87 - Maintenance setup functions

INTERFERENCE TO TELEVISIONS AND RADIOSThe product covered by this Instruction Manual produces low radio waves while it is inoperation. The product ca

Strany 88

- 2.8 -Setting the work on the machineSet the work on the table as following.• Adjust the head height before placing a work on the machine. ( page 2.

Strany 89 - Printing HEX CODE [DATA DUMP]

- 2.9 -Setting the work on the machineFixing the work holderWhen printing on a material of allowable size (1870 x 1050mm maximum) that tends to bendup

Strany 90

- 2.10 -Establishing the origin and the print areaInitial valueThe origin and the print area are set as follows by default until they are changed:Effe

Strany 91

- 2.11 -Establishing the origin and the print areaChanging the origin and the print areaThe default origin and the print area may be changed as needed

Strany 92

- 2.12 -Checking and solving nozzle cloggingMake test printing to check whether there is nozzle clogging or other printing failures.If the finished te

Strany 93 - [Wiper Exchng]

- 2.13 -Checking and solving nozzle cloggingSTEPS:1. The machine enters the LOCAL mode.2. Press the [TEST] key.3. Select from all head (L1234), ink he

Strany 94

- 2.14 -11. Press the [ENTER] key.12. Press the XY [ ] or [ ] keys to select the typeof cleaning.Normal : Select this if any line is bent.(When select

Strany 95

- 2.15 -Correcting the work feed rateWhen the work type is changed, the amount of work feed changes.If the correction value is not appropriate, stripe

Strany 96 - It cleans up the ink drains

- 2.16 -STEPS:1. The machine enters the LOCAL mode.2. Press the [FUNCTION] key.3. Press the [ENTER] key.4. Press the XY [] or [ ] keys to select a typ

Strany 97 - Fill up the ink

- 2.17 -Displays the feed correct value type on drawing. (+/-)[+] displays if the feed correct value is plus.[-] displays if the feed correct value is

Strany 98

- i -ForewordCongratulations on your purchase of a Garment Printer “GP-1810D”.GP-1810D allows the original discharge liquid to print directly cloths a

Strany 99

- 2.18 -Displays the in-use setup type.Displays the feed correct value type on drawing. (+/-)[+] displays if the feed correct value is plus.[-] displa

Strany 100 - Routine Flushing

- 2.19 -Printing an image from source data4. During the printing.5. After the printing operation is completed, putthe machine back into the LOCAL mode

Strany 101 - Routine Cleaning

- 2.20 -Displaying machine informationDisplays the firmware version, ink level etc. This following describes the procedures to display themachine in

Strany 102

- 2.21 -To replenish ink, set a new ink cartridge in the ink stationIf ink in the cartridge comes to an empty, the corresponding message appears.Print

Strany 103 - Are Encountered

- 2.22 -Filling of the washing liquid at the end of the worksIf you leave the head for discharge liquid with discharge liquid filled in for a long tim

Strany 104

- 2.23 -Filling of the cleaning liquid at the end of the works11. Filling of the washing liquid iscompleted, menu returns to theLOCAL mode.• Every da

Strany 105 - If image quality declines

- 2.24 -Turning the power offTo turn the power off, check first whether there is data in the machine that remains to be printed.Also make sure that th

Strany 106 - Unable to discharge

- 3.1 -CHAPTER 3Daily CareThis chapter describes daily cleaning.Table of contentsRoutine maintenance ...

Strany 107

- 3.2 -Routine maintenanceBe sure to conduct maintenance works for the machine when necessary or periodically so as to usethe device for a long time w

Strany 108

- 3.3 -Washing ink from the slider surfaceThe ink may gel and collect under the slider after a long use. The ink droplets may grow insize and smear th

Strany 109

- ii -TABLE OF CONTENTSForeword ... iOn This Operation

Strany 110 - Error messages

- 3.4 -Filling of the washing liquid at the end of the worksIf you leave the head for discharge liquid with discharge liquid filled in for a long time

Strany 111

- 3.5 -Filling of the cleaning liquid at the end of the works11. Filling of the washing liquid iscompleted, menu returns to theLOCAL mode.• Every day

Strany 112 - - 6.10

- 3.6 -Cleaning Tools :• Cleaning liquid (A29)• Cotton swabsSTEPS:1. Press the [FUNCTION] key.2. Press the XY [] or [ ] keys to select [MAINTE-NANCE].

Strany 113 - APPENDIX

- 3.7 -Cleaning the wiper cap and wiper cleaner3. Press the [ENTER] key.4. Press the XY [ ] or [ ] keys to select [Station].5. Press the [ENTER] key.T

Strany 114 - Basic specifications

- 3.8 -8. Wipe off the ink adhering to the wiper cleanerwith cotton swab.• Full attention should be paid to clean the wiperdue to the sharp edges of t

Strany 115 - Item Specifications

- 3.9 -Cleaning the nozzle [Nozzle Cleaning]Clean up the nozzle as for nozzle clogging.If nozzle clogging cannot be resolved even after cleaning sever

Strany 116 - Ink specification

- 3.10 -7. Open the station cover and clean the bothsides of the wiper.Use a cotton swab soaked with the cleaningliquid (A29) to clean off ink blots o

Strany 117 - Consumable items

- 3.11 -Cleaning the nozzle [Nozzle Cleaning]10. Press the [ENTER] key.The initial operation is performed.Remaining time is displayed.After remaining

Strany 118 - Location of safety labels

- 3.12 -Replacing the flushing tray ink absorberReplace the ink absorber in the flushing tray if it appears to be clogged. Clogged ink absorber maycau

Strany 119

- 3.13 -Replacing the flushing tray ink absorber7. Remove the F-cover upward from the flushingtray.8. Remove the ink absorber.9. Place a new ink absor

Strany 120 - Other labels

- iii -Setting the work on the machine... 2.8Fixing the work holder ...

Strany 121 - Function flowchart

- 3.14 -When the waste ink tank becomes fullWaste ink used for cleaning the heads will gather in the waste ink tank.When the message “Near Full” or “F

Strany 122 - - A.10

- 3.15 -Ink discharge way cleaning [Drain Wash]The ink discharge way may become clogged by coagulated ink. It must be cleaned at regular inter-vals to

Strany 123 - Function Flowchart

- 3.16 -7. Open the station cover.8. Remove the cleaning liquid (A29) with a sy-ringe. During the suction pause period, dropthe cleaning liquid (A29)

Strany 124 - - A.12

- 3.17 -When not in use the machine over the long term [StorageWash]When not in use the machine over a week, perform [Storage Wash] function to clean

Strany 125

- 3.18 -8. Take off the wiper with holding projections atthe tips of wiper.9. Use a cotton swab soaked with the cleaningliquid (A29) to clean off ink

Strany 126 - - A.14

- 3.19 -When not in use the machine over the long term [Storage Wash]12. Close the station cover, and press the [ENTER]key.13. Press the JOG [] or [ ]

Strany 127

- 3.20 -16. Fill the cap with the cleaning liquid (A29) usinga syringe.Dry suction starts in cycles consisting of 10 seconds ofsuction followed by 10

Strany 128 - - A.16

- 4.1 -CHAPTER 4How to Set FunctionsThis chapter describes how to set up the machine.Table of contentsBasic operations of menus ...

Strany 129

- 4.2 -Basic operations of menusThis section describes how to change over the operation modes and how to operate the menus.The following gives the key

Strany 130 - - A.18

- 4.3 -Basic operations of menus1. Select the LOCAL mode.Ascertain first that the machine does not perform printing under the REMOTE mode, then presst

Strany 131

- iv -CHAPTER 5 MaintenanceMaintenance of the machine ... 5.2Setting the maintenance fu

Strany 132 - - A.20

- 4.4 -Function modeThe FUNCTION mode enable to regists 4 types.If the type has been registered for each medium type, it becomes easy to change plott

Strany 133

- 4.5 -Setup functionsThe FUNCTION mode consists of 14 items.The following describes the overview of and settings for each function.Print ModeSets the

Strany 134 - - A.22

- 4.6 -PrioritySpecifies whether the values set on the machine (print) are given priority or the values set on thecomputer (host) are enabled as for t

Strany 135

- 4.7 -Setup functionsFeed CorrectWhen the machine is not print a clear image (e.g., unwanted stripes may appear on the image),to correct the work fee

Strany 136 - - A.24

- 4.8 -<< LOCAL >>X =1010 Y = 1860FUNCTIONSETUP < ENT >FUNCTIONDISPLAY < ENT >DISPLAYJAPANESE < ent >DISPLAYENGLISH <

Strany 137

- 5.1 -CHAPTER 5MaintenanceIn order to keep the machine in good operating condition, it is necessary to carry outmaintenance of the machine periodical

Strany 138 - - A.26

- 5.2 -Maintenance of the machineThe term “maintenance” as used herein refers to actions that need to be taken to keep the machine ingood operating co

Strany 139

- 5.3 -Maintenance of the machineMaintenance setup functionsThe following describes the overview of and settings for each function.Name functionList P

Strany 140 - - A.28

- 5.4 -Printing setup conditions [LIST]This function lists the current settings of the machine.This is useful in carrying out maintenance of the machi

Strany 141

- 5.5 -Printing HEX CODE [DATA DUMP]This function prints data commands received from the computer, in HEX code.The HEX code is an alphanumeric represe

Strany 142 - - A.30

- v -APPENDIXBasic specifications... A.2Ink specification ...

Strany 143

- 5.6 -When medium thickness is changed [Print Adjust]When the head height is adjusted, be sure to correct the dot positions.This function corrects th

Strany 144 - - A.32

- 5.7 -When medium thickness is changed [Print Adjust]6. Press the [ENTER] key.7. Repeat STEPS 5 and 6 to correct the dot posi-tions on Patterns 2 to

Strany 145

- 5.8 -Cleaning the station interior [Station]-[Carriage Out]Move the carriage when cleaning the station interior and replacing the consumable parts.•

Strany 146 - - A.34

- 5.9 -When the message [Replace Wiper] is displayed [Station]-[Wiper Exchng]The wipers are consumable parts. When the following message is displayed,

Strany 147

- 5.10 -7. Holding the projections at both ends, insert anew wiper into place.• Contacting the rubber portion of a new wipershall be avoided. It can c

Strany 148 - - A.36

- 5.11 -Fill up the ink [Ink Filling]Perform the [Storage Wash] function for nozzle clogging when head cleaning or [Nozzle cleaning]does not work.In

Strany 149

- 5.12 -Set up the ink of different type [Ink Change]Replace the filled ink with the other ink of different type.Outfit : • Washing liquid cartridge

Strany 150 - - A.38

- 5.13 -Set up the ink of different type [Ink Change]9. Set up the washing liquid cartridge to all slots.10. It automatically sucks up the washing liq

Strany 151

- 5.14 -18. After setting up the cartridge, the select screenof the ink type is displayed.Press the XY [] or [ ] keys to set the ink type.19. Press th

Strany 152 - Printed in Japan

- 5.15 -Displaying the firmware version [INFORMATION]Display the firmware versions of this machines and an interface.If trouble occurs, please inform

Komentáře k této Příručce

Žádné komentáře