MIMAKI GP-1810 Manuál s instrukcemi stáhnout pdf (Strana 94)

- 5.10 -

7. Holding the projections at both ends, insert a

new wiper into place.

• Contacting the rubber portion of a new wiper

shall be avoided. It can cause the nozzle to be

clogged.

8. Clean the wiper guide shaft using a cotton bud

or cloth.

If dirt is hard to remove, use a cotton bud of cloth dampened

with water.

• Cleaning the wiper guide shaft.

(

page 3.7 )

Extremely dirty wiper guide shaft may cause

operation failure of the wiper, resulting in error

display.

9. Check the flashing tray ink absorber. Replace if

ink is found on the ink absorber.

(

page 3.12 )

10. Close the station cover, then press the [EN-

TER] key.

11. The machine enters the LOCAL mode.

Initialize

Please Wait

<< LOCAL >>

X =1010 Y = 1860

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 151 152

Žádné komentáře

MIMAKI GP-1810 Manuál s instrukcemi Strana 94